Welcome to the Electrician Portal
One workspace for the whole trade — the calculators, the code, the crew, and the paperwork. Free forever.
Rule of thumb: keep a branch circuit at or under 3%. Uses VD = 2 x K x I x L / CM (K = 12.9 copper, 21.2 aluminum). Verify against the current NEC for your job.
Four doors into the electrician world.
Tap a tile. Everything a working electrician needs is one touch away — no digging, no clutter.
Tools
Voltage drop, wire size, conduit and box fill — the field math, done.
5 calculatorsOpen the toolbox →Code Lookup
The everyday NEC rules in plain English, searchable in seconds.
50 code rulesOpen the code →The Board
Real electricians talking pricing, code calls, and the business side.
Live nowJoin the crew →Get Found
A free directory listing. No lead fees, no middleman, ever.
List freeClaim your spot →A room full of electricians. Already talking.
Electricians helping electricians — jump in.
Panel swap on a 1960s house — do I have to AFCI the whole thing, or just the circuits I actually touch?
Just the circuits you extend or modify — 210.12(D). Untouched existing branch circuits are grandfathered. Note what you replaced and you’re clean.
First solo 200A service upgrade is in the books. Meter released, passed inspection first shot. Lost sleep over this one for two weeks — feels good.
What are you charging for a Level 2 EV charger install right now? 60A circuit, about 40 ft run, panel has room. Want to sanity-check my number before it goes out.
Flat install plus permit here, more if the panel needs a load-calc bump. Don’t give away the drive time — that’s where guys eat it.
PSA: keep a label maker on the truck. Clean panel schedules cut callbacks, and the next tech in that box actually likes you. Cheapest tool I own, best ROI.
Passed a rough-in inspection with zero corrections for the first time all year. Pre-walking the job with the checklist off the Field Reference is paying off.
Board posts shown are illustrative of the conversations happening inside.
Every calculator, one tap away.
Swipe the rail. Each one opens the full tool.
Get found. List your business free.
Homeowners search this directory for a real electrician. Claim your spot — no lead fees, no middleman, no catch.
The Field Pocket Reference — yours free.
Print it, fold it, keep it in the truck. The everyday NEC rules, sizing tables, and a get-paid checklist.
- Code cheat-sheets — the everyday NEC rules, plain English.
- Sizing tables — conductor, conduit, and box-fill at a glance.
- Get-paid checklist — deposit, change-order, and final-invoice steps.
Get it now, plus one short note a week — a new tool or code tip. No spam.
Want it finished? Grab a pro pack.
Free tools cover the math. The packs are the branded, ready-to-send documents.
Estimate & Proposal Pack
Polished, itemized documents that make your bid look like a real business.
Invoice & Get-Paid Pack
Invoices, deposit requests, and follow-ups built to shorten the wait for payment.
Complete Contractor Bundle
Every estimate, contract, invoice, and job-tracking template in one bundle.
Gear we recommend.
A short, honest list that earns its spot in the truck. Buy wherever you like — these point to general searches and official sources.
Some links may become affiliate links in the future.